Products
Auto-Solve: bespoke automotive test leads and generic engine systems related technical information.
Technical CD
Auto-Solve 'Diagnostic Assistance' E-book
Visit the diagnostic-assistance website for full details
Computer requirements: Windows 95 or subsequent packages / Internet Explorer version 4 or later |
|
The CD is priced at £39.95 inclusive, posted free to any
UK destination
Order now at our online store
Order from Amazon
For online ordering from overseas please select form an alternative supplier :- Auto-Solve distributors
Two-pin break out lead - oscilloscope
|
|
This item is designed and manufactured by Auto-Solve
and enables easy connection when testing automotive components
with a standard two-pin junior timer connector plug.
One end of the lead has two 4mm banana sockets suitable for connection to an engine analysers or oscilloscope equipment. The other ends of the lead have the male and female two-pin junior time plugs. The female plug also employees a quick release mechanism. |
|
AS-OS-02
Two pin break out lead for an oscilloscope
Approximate length 100cms
|
|
Typical applications are: multi-point injectors,
some Lucas / Rover SPI injectors, crankshaft position sensors
(inductive), camshaft position sensors (inductive), coolant temperature
sensors, knock sensors, some Vauxhall ignition coils, some Austin
Rover ignition amplifiers, pulse air solenoid valves, Bosch K-Jetronic
thermo-timer switches, cold start injectors and warm up regulators,
to name but a few.
Please note these are only examples - wiring plugs will vary from
manufacture to manufacture, and with the model and age of the
vehicle.
Examples connections - click here
|
|
|
|
The user will have to take care of polarity when checking components.
The test lead ends are intentional both coloured black with blue and yellow reference bands. It is suggested
that if the scope requires an earth this connection is made to the
vehicle and the other oscilloscope cable end is used on either side
of the test lead. It is not recommended that both test lead terminals
and both oscilloscope leads are connected together, unless the user
is sure this will have no detrimental effect on either the vehicle
or the equipment being used. |
|
The lead also has provision for inserting a low amperage current clamp.
|
 |
The test lead is £23.50 inclusive, posted free to any
UK destination
Order now at our online shop
Six-pin universal breakout test lead

These items are designed and manufactured by Auto-Solve and enable easy connection when testing automotive components with up to six terminals regardless of the multi-plug design.
At one end of the test lead there are six 4mm banana sockets suitable for connection to an engine analysers or oscilloscope equipment. The other end of the lead has six pairs of colour coded loose lead male and female terminals. The user can then create a 'break-out' connection to any automotive multi-plug with the same sized terminals with a maximum of six matting pairs. By design of having no moulded multi-plugs, the user is not restricted to shape, size or manufacturer's design - thus the lead is 'generic'.
Three sizes of terminal are available; 1.5mm (small); 2.3mm (medium) and 2.8mm (large). The leads are approximately 30cms long.
Some connection examples and a manufacturer's multi-plug terminals sizes have been included as a guide - click here
For terms and conditions of use - click here 
|
 |
AS-6P-SM is priced at £49 inclusive, posted free to any UK destination
Order now at our online shop
|
 |
AS-6P-ME is priced at £49 inclusive, posted free to any UK destination
Order now at our online shop
|
 |
AS-6P-LR is priced at £49 inclusive, posted free to any UK destination
Order now at our online shop
|
The online shop also has discounts if all three sizes are ordered as a set - click here
Sparkplug extension test-leads
These leads are designed to aid diagnostics on secondary ignition circuits by allowing an HT measurement to be made when there are no, or limited access, to any plug leads. The leads are specifically designed for use with an HT pick-up as part of an oscilloscope diagnostic kit but can also simply be used with a spark-tester (click here ). The lead also comes with a safety earth connection wire.
Test leads in use
Test lead user instructions 
This lead set is priced at £24.95 inclusive, posted free to any UK destination
Order now at our online shop |
|
| |
|
The online shop also has discounts if a set of four are ordered - click here
Multimeter leads
Multimeter test lead kit: include two test leads; two crocodile clips; a pair of acupuncture probes and a probe repair kit (two pins & a grub screw). Ideal for general testing and back-probing multi-plugs.
This lead set is priced at £24.95 inclusive, posted free to any UK destination
Order now at our online shop |
|
| |
|
Fuse link leads
ATO or ATC the standard size fuse test lead. Simply remove the fuse insert the test lead into the fuse box, refit the original fuse into the lead's holder and then test the circuit's current using an oscilloscope pick-up or a hand-held inductive current clamp.
This lead set is priced at £14.75 inclusive, posted free to any UK destination
Order now at our online shop
|

AS-FL-ST |
Mini size fuse test lead. Simply remove the fuse insert the test lead into the fuse box, refit the original fuse into the lead's holder and then test the circuit's current using an oscilloscope pick-up or a hand-held inductive current clamp.
This lead set is priced at £14.75 inclusive, posted free to any UK destination
Order now at our online shop
|

AS-FL-MI |
Test lead storage bag

Protect your test leads with this made-to-measure zip up vinyl test lead storage bag 38cms x 13cms.
The test lead bag is priced at £9.50 inclusive, posted free to any UK destination
Order now at our online shop
|
| |
|